Jubilee O Clip (OC1315MS) 7.5mm Band Width, 13mm - 15mm Zinc Steel | Polybag of 50

$19.27 Incl Gst


Description

Jubilee O Clip 2-ear 
Jubilee ‘O’ Clip 2-Ear clamps are widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines and also suitable for low pressure hydraulic applications. The absence of a screw mechanism allows Jubilee® 'O' Clips to be useful on extremely small hoses. The tamper proof nature of the fitting may also make the Jubilee® ‘O’ Clips suitable for certain applications where there may be a risk associated with any interference to the fitting. Sometimes affectionately referred to as “Lemon Clips” due to their shape and also referred to as double ear clips and 2-ear clips. Pincers (both normal closing and side closing) are used to crimp the ears of the clamps and affect a proper seal. 2-ear clamps are best installed by closing one ear fully first, the second ear is then closed so that the first ear opens slightly (gap to be approximately 1.5mm). This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or ageing.

Jubilee O Clip 2-ear 
Jubilee ‘O’ Clip 2-Ear clamps are widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines and also suitable for low pressure hydraulic applications. The absence of a screw mechanism allows Jubilee® 'O' Clips to be useful on extremely small hoses. The tamper proof nature of the fitting may also make the Jubilee® ‘O’ Clips suitable for certain applications where there may be a risk associated with any interference to the fitting. Sometimes affectionately referred to as “Lemon Clips” due to their shape and also referred to as double ear clips and 2-ear clips. Pincers (both normal closing and side closing) are used to crimp the ears of the clamps and affect a proper seal. 2-ear clamps are best installed by closing one ear fully first, the second ear is then closed so that the first ear opens slightly (gap to be approximately 1.5mm). This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or ageing.

Cross Reference Numbers

This part is compatible or replaces part numbers: 
144-0704 144-0718

Details

  • Maximum Pressure PSi: 7.5
  • Band Thickness mm: 1.0
  • Maximum Torque Nm: 200.0
  • Pack Qty: 50.0
  • Pack Type: Polybag

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Contact Us

Unit 2, 23 Barfield Crescent,Edinburgh North, SA 5113, Australia
+61870798910 (International)
(08)70798910 (Local)
contact@totalparts.com.au