(61-4253) Electronic Throttle Valve Thermo King 61-8820 SLXi / Advancer

$1,194.57 Incl Gst


Description

Electronic Throttle Valve

In September 2016, Thermo King announced that a new Electronic Throttling Valve (ETV) is available for truck and trailer units, which utilise the older ETV.

The corporation promise that the new ETV do not have impact on the reliability, function or performance of the unit. The only noticeable change is on the ETV body , which only visible when the service door is opened. 

The new ETV has a change in the design of the valve body, motor actuator and cartridge. The new ETV also has an integrated Deutsch connector located on the top of the valve (no harness). The cartridge insert design allows for ease of service and low torque setting, providing low strain to piping during service and repair work.

ETV Installation on older unit models

The ETV service kit and motor actuator kit (service p/n: 61-4253 and 40-0997) is available to order from our online store for older generation units.

The new ETV can be placed to older units as well, however, you have to look after following.

In order to retrofit the new ETV on older multi-temp trailer unit models in the field (already fitted with the previous ETV) it will be necessary to install a multi-temp accumulator tank (service p/n: 67-2747) ordered after January 2017.

Services fitting the new ETV to an old SLX/SLXe multi-temp trailer unit (using the original accumulator tank) will experience the following issue:

In order to retrofit the new ETV on older single-temp trailer unit models in the field (already fitted with the previous ETV) it will be necessary to install a single-temp accumulator tank (service p/n: 67-2335).

Services fitting the new ETV to an old SLX/SLXe single-temp trailer unit (using the original accumulator tank) will experience the following issue:

Accumulator tank bracket change on all accumulator tanks can be purchased from Thermo King Local Dealers from January 2017.

To retrofit a truck unit with the new ETV, a jumper harness will be required. The jumper harness can be ordered from local Thermo King Dealer with service p/n: 42-2524.

NOTE: The jumper harness is not required for truck units that already have the new ETV installed from factory.

 

Electronic Throttle Valve

In September 2016, Thermo King announced that a new Electronic Throttling Valve (ETV) is available for truck and trailer units, which utilise the older ETV.

The corporation promise that the new ETV do not have impact on the reliability, function or performance of the unit. The only noticeable change is on the ETV body , which only visible when the service door is opened. 

The new ETV has a change in the design of the valve body, motor actuator and cartridge. The new ETV also has an integrated Deutsch connector located on the top of the valve (no harness). The cartridge insert design allows for ease of service and low torque setting, providing low strain to piping during service and repair work.

ETV Installation on older unit models

The ETV service kit and motor actuator kit (service p/n: 61-4253 and 40-0997) is available to order from our online store for older generation units.

The new ETV can be placed to older units as well, however, you have to look after following.

In order to retrofit the new ETV on older multi-temp trailer unit models in the field (already fitted with the previous ETV) it will be necessary to install a multi-temp accumulator tank (service p/n: 67-2747) ordered after January 2017.

Services fitting the new ETV to an old SLX/SLXe multi-temp trailer unit (using the original accumulator tank) will experience the following issue:

In order to retrofit the new ETV on older single-temp trailer unit models in the field (already fitted with the previous ETV) it will be necessary to install a single-temp accumulator tank (service p/n: 67-2335).

Services fitting the new ETV to an old SLX/SLXe single-temp trailer unit (using the original accumulator tank) will experience the following issue:

Accumulator tank bracket change on all accumulator tanks can be purchased from Thermo King Local Dealers from January 2017.

To retrofit a truck unit with the new ETV, a jumper harness will be required. The jumper harness can be ordered from local Thermo King Dealer with service p/n: 42-2524.

NOTE: The jumper harness is not required for truck units that already have the new ETV installed from factory.

 

Cross Reference Numbers

This part is compatible or replaces part numbers: 
THERMO KING: 61-4253, 614253, 61-4253, 61-8820, 618820, 61-7723, 617723, 40-0947, 400947, 66-9516, 669516

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

Contact Us

Unit 2, 23 Barfield Crescent,Edinburgh North, SA 5113, Australia
+61870798910 (International)
(08)70798910 (Local)
contact@totalparts.com.au